A-A-1733A
C. The stencilboard shall conform to the requirements as found in Table 1 when tested in accordance with paragraph 4.C.(3).
Table 1
Characteristic |
Type I |
Type II |
Basis weight (92.9 m2) (1000 ft2) Bursting strength minimum Grain Thickness Curl - maximum |
21.32-27.22 kg (47-60 lbs) 611.5 kPa (74 p.s.i.) long direction 0.254-0.305 mm (0.010-0.012 in) 3.175 mm (1/8 in) |
31.75 - 41.73 kg (70-92 lbs) 1135.5 kPa (150 p.s.i.) long direction 0.330-0.457 m (0.013-0.018 in) 3.175 mm (1/8 in) |
I). Stencilboard shall be available in the sizes as specified in the contract or order. Dimensional tolerances shall be ±0.32 centimeter (1/8 inch) in length and width.
E. The machine direction of the cut stencilboard shall be parallel to the long dimension of the cut stencilboard.
F. Workmanship: The stencilboard shall have a hard, smooth surface and shall be free from checks, blows, indentations, holes, tears, foreign matter and other defects which affect serviceability and appearance.
2. APPLICABLE DOCUMENTS AND I)OCUMENT SOURCES: The following documents form a part of this Commercial Item Description to the extent specified herein. Unless otherwise indicated, the issue in effect on the date of invitation for bids or request for proposal shall apply:
Federal Regulations:
Title 40, Code of Federal Regulations, Protection of Environment, Part 250, Guideline for Federal
Procurement of Paper Products containing Recovered Materials.
Copies of the U.S. Code of Federal Regulations may be purchased with a VISA, Master Card, or prepaid check through:
2.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business